> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://wiser.airwallet.net/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# 240V North America Home-Style installation guide

| The Airwallet Pro is designed for machines with coin acceptance terminals. Home-style machines does not have that. However, the Airwallet Pro is capable of controlling a relay that can control the power to the machine. This relay can be provided by Airwallet and installed together with the Airwallet Pro as illustrated (below).

### Installation videos

Coming soon

---

### Recommended dashboard setup 

Variable ➜ Full Duration
Time increment: 10 min., Busy signal: None

---

### Recommended machine setup 

1. Set up the AWPRO on the dashboard according to the instructions above.
2. Check if the relay can be mounted inside the machine itself or if you need to use a junction box for safe installation.
3. Connect the AWPRO and relay according to the instructions below (remember to shut off power before installing).
4. Isolate the unused wires of the AWPRO
5. Do a test transaction with the mobile app to check that everything is working. You can contact Airwallet to become a test-user.
---

### Wiring diagram

| **No.** | **AW PRO310 or higher** | **Wiring diagram** |
| --- | --- | --- |
| 1 | Wire no. 1 | Hot1 terminal |
| 2 | Wire no. 2 | Neutral terminal |
| 3 | Wire no. 3 | Hot1 terminal |
| 4 | Wire no. 4 | Relay A1 |
| 5 | Wire no. 5 | Not in use |
| 6 | Wire no. 6 | Not in use |
| 7 | Wire no. 7 | Not in use |

| **Jumper 1 :** Neutral terminal ➜ Relay A2




![](https://storage.crisp.chat/users/helpdesk/website/8fbd610f32d91000/4-prong-american-home-style3x_1te9jrm.png)