> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://wiser.airwallet.net/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Electrolux - myPRO XL

**### Recommended dashboard setup 

Fixed ➜Pulse operated
Pulse length: 100 ms., Pulse repetition: 1, Busy signal: None, Occupied for: 15 min.

---

### Recommended machine setup 

1. Press the reset button (A) for 2 seconds, then release the finger to enter service mode. When this succeeds the display will show 8888.
![](https://storage.crisp.chat/users/helpdesk/website/8fbd610f32d91000/screenshot-2023-12-14-at-12145_yh9fk4.png)
2. Now Set C1 (Coin Value 1) to 1
3. Set C2 (Coin Value 2) to 0
4. Set each Program to the Value of 1
5. End Programming

---

### Wiring diagram

| **No.** | **AW PRO310 or higher** | **Wiring diagram** |
| --- | --- | --- |
| 1 | Wire no. 1 | Line |
| 2 | Wire no. 2 | Neutral |
| 3 | Wire no. 3 | Input Coin 1 |
| 4 | Wire no. 4 | Not in use |
| 5 | Wire no. 5 | Not in use |
| 6 | Wire no. 6 | Not in use |
| 7 | Wire no. 7 | GND Coin 1 |


![](https://storage.crisp.chat/users/helpdesk/website/8fbd610f32d91000/diagram-mypro-xl4x_geeurc.png)