> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://wiser.airwallet.net/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Electrolux - myPRO Zip Dryer

### Recommended dashboard setup 

Fixed ➜Pulse operated
Pulse length: 500 ms., Pulse repetition: 1, Busy signal: High

---

### Recommended machine setup 

Program time depends on how much the customer wishes to charge for X minutes of drying. 

1. Put the machine into Programming Mode by shorting pins 1 & 3 until the display shows dec (decimal). Decimal Point is optional.
2. Set C1 (Coin Value 1) to the figure of 1
3. Set C2 (Coin Value 2) to the figure of 0
4. Press the start button and the 70°C will appear (pressing the 70° temperature button will add time - 50° will decrease time)
5. Confirm time by pressing the start button
6. Repeat step 4 for the 50°C
7. End Programming

---

### Wiring diagram

| **No.** | **AW PRO310 or higher** | **Wiring diagram** |
| --- | --- | --- |
| 1 | Wire no. 1 | Line and Terminal 8 |
| 2 | Wire no. 2 | Neutral |
| 3 | Wire no. 3 | Terminal 5 |
| 4 | Wire no. 4 | Terminal 1 |
| 5 | Wire no. 5 | Terminal 7 |
| 6 | Wire no. 6 | Not in use |
| 7 | Wire no. 7 | Not in use |


![](https://storage.crisp.chat/users/helpdesk/website/8fbd610f32d91000/electrolux-myprozip_zno62y.png)