> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://wiser.airwallet.net/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Encore Pro - Electric DLHF0315EC2 or Gas LHF0315GC2 Dryer

### Installation videos

Coming soon

---

### Recommended dashboard setup w. fixed cycle price

Fixed ➜ Pulse operated: 150 ms.

Pulse repetition: Should equal to the cycle price divided by the pulse value (0,25$)
(Example: Cycle price 3.5$ / pulse value 0,25$ = pulse repetition 14)

Busy signal: None

---

### Recommended machine setup 

###### Enter service mode:
* Unlock and remove the coin box
* Press and release the Service Switch located in the rear of the coin vault to enter service mode.
* Press the Start button and the display will show "SE" confirming access to the service registers.

###### Price the programs:
* Use the "Low" and "No heat" buttons to navigate to the desired registers.
* Go to register 40, High heat and press Start to enter, The current price will be shown in the display blinking.
* Use the three program selection buttons; Medium, Low, No Heat to change each of the three digits in the display. Each button increments a corresponding digit, left to right, in the price. Each digit rolls over from 9 to 0 without affecting the other digits. Once the desired price has been set in the register, press the Start button to save the value and exit the register.
* If registers 041, 042 and 043 = "0.00" the values of these registers will be set to the same value as register 040. If different pricing is desired, program each register separately repeating steps 4-5.
* Press the Service Switch in the vault to exit service mode.
* Check the newly entered prices by selecting each program.

---

### Wiring diagram

| **No.** | **AW PRO310 or higher** | **Wiring diagram** |
| ---- |
| 1 | Wire no. 1 | Line |
| 2 | Wire no. 2 | Neutral |
| 3 | Wire no. 3 | Coin 1: CN9 terminal 2 (green) |
| 4 | Wire no. 4 | Not in use |
| 5 | Wire no. 5 | Not in use |
| 6 | Wire no. 6 | Not in use |
| 7 | Wire no. 7 | Coin 1: CN9 terminal 5 (white) |



![](https://storage.crisp.chat/users/helpdesk/website/8fbd610f32d91000/encore-pro-electric-dlhf0315ec_1li5z90.png)