> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://wiser.airwallet.net/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Encore Pro - Front load washer HLFP715C2

### Installation videos

Coming soon

---

### Recommended dashboard setup w. fixed cycle price

Fixed ➜ Pulse operated: 63 ms.

Pulse repetition: Should equal to the cycle price divided by the pulse value (0,25$)
(Example: Cycle price 3.5$ / pulse value 0,25$ = pulse repetition 14)

Busy signal: None

---

### Recommended machine setup 

###### Enter service mode:
* Press and hold COLD, DELICATE, and START buttons for 3 sec.
* Use the cycle selection buttons to enter the owner’s four digit PIN.
* Press START. The display will now show “SE”

###### Price the programs:
* Press the program or option button for which the price is to be programmed. The current price for that selection will be displayed.
* Press the START button. The price will blink indicating it can now be changed.
* Use the four program-selection buttons; COLD, WARM, HOT, and DELICATE to change each of the four digits in the price. Each button increments a corresponding digit, left to right, in the price.
* When the desired price is set press START. The display will stop blinking indicating the new value has been saved.
* Repeat steps 2 through 5 for each remaining wash program and option buttons. The option prices in- crease the price of the chosen program price by the value entered for each option. Typically, options are set to values of $0.25 or $0.50.
* When all prices have been saved exit the service mode by pressing the service switch or by waiting 60 seconds.
* Verify the program and option prices by selecting each program with and without the option selections.

---

### Wiring diagram

| **No.** | **AW PRO310 or higher** | **Wiring diagram** |
| ---- |
| 1 | Wire no. 1 | Line |
| 2 | Wire no. 2 | Neutral |
| 3 | Wire no. 3 | Coin 1: CN2 terminal 2 (White) |
| 4 | Wire no. 4 | Coin 1: CN1 terminal 4 (Brown) |
| 5 | Wire no. 5 | Not in use |
| 6 | Wire no. 6 | Not in use |
| 7 | Wire no. 7 | Not in use |

![](https://storage.crisp.chat/users/helpdesk/website/8fbd610f32d91000/encore-pro-front-load-washer-h_6xnn60.png)