> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://wiser.airwallet.net/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# LG - Giant C Washer (No feedback)

# Installation videos

${youtube}[LG Giant C Washer - Airwallet PRO](Q3_2GLzKXJg)
---

# Recommended dashboard setup

Pulse Type: Fixed ➜ Pulse operated
Pulse length: 63-80ms
Pulse repetition: 1
Busy signal: None
---

# Recommended machine setup

Setup the machine with coin drop 1 according to the installation manual.
---

### Wiring diagram

| **No.** | **AW PRO310 or higher** | **Wiring diagram** |
| ---- |
| 1 | Wire no. 1 | Line - 100-240VAC |
| 2 | Wire no. 2 | Neutral - 100-240VAC |
| 3 | Wire no. 3 | Coin drop connector - PIN 6 (RED or ORANGE wire) |
| 4 | Wire no. 4 | Coin drop connector - PIN 4 (BROWN wire) |
| 5 | Wire no. 5 | Not in use |
| 6 | Wire no. 6 | Not in use |
| 7 | Wire no. 7 | Not in use |


# If NO COIN DROP is installed, It may be required to loop together the LIGHT BLUE and the GREY wires at pins 1 and 3, in order for the machine to operate properly. When disconnected, the machine will enter "Programming" mode.



![](https://storage.crisp.chat/users/helpdesk/website/-/8/f/b/d/8fbd610f32d91000/screenshot-2025-07-23-113907_gil9jr.png =837xauto)
![](https://storage.crisp.chat/users/helpdesk/website/-/8/f/b/d/8fbd610f32d91000/20250224150433_zegtob.jpg =836xauto)