> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://wiser.airwallet.net/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Primus SP10/SD10 installation guide (No coin drop)

### Recommended dashboard setup

![image.png](https://epflzphzkusfkllchkfz.supabase.co/storage/v1/object/sign/media/fc4da97f-e3bc-4b8d-b9e3-677a44b06d48/1780488834928-daibu1eviii.png?token=eyJraWQiOiJzdG9yYWdlLXVybC1zaWduaW5nLWtleV9mZjVhYWRhNC1mNWEwLTRjYjctYWE5YS0yZDYzMmQwYzQ0NjkiLCJhbGciOiJIUzI1NiJ9.eyJ1cmwiOiJtZWRpYS9mYzRkYTk3Zi1lM2JjLTRiOGQtYjllMy02NzdhNDRiMDZkNDgvMTc4MDQ4ODgzNDkyOC1kYWlidTFldmlpaS5wbmciLCJpYXQiOjE3ODA0ODg4MzUsImV4cCI6MTc4MDQ5MjQzNX0.IpWX9Wlfdv8gDMdH-W0hGlW0MFEoeYHk_pIJqBMqK_M)

**Primus SP10/SD10**  

Fixed ➜ Pulse operated  

Pulse length: 100 ms., pulse repetition: 1, busy signal: Low in use

---

### Recommended machine setup

As per the machine guides recommendations  

  

When programming the machine you have to disconnect the jumper between H11-2 and H11-11 to enter manual programming mode - and then click the correct combination of buttons on the display.  

Example:  

OPL 1/2/3 = off  

Pulse = 1.00  

Price = 1.00  

Den1 = 1.00  

Den2 = 1.00  

  

The actual price of the machine is going to be set from the Airwallet Dashboard - The important thing is to make sure that it is possible to start the machine, when it recieves the payment pulse.

---

### Wiring diagram

| **No.** | **AW PRO340 or higher** | **Wiring diagram** |
| --- | --- | --- |
| 1 | Wire no. 1 | Line |
| 2 | Wire no. 2 | Neutral |
| 3 | Wire no. 3 | Terminal H11-5 |
| 4 | Wire no. 4 | Not in use |
| 5 | Wire no. 5 | Not in use |
| 6 | Wire no. 6 | Terminal H3-5 |
| 7 | Wire no. 7 | Terminal H11-4 |
| 8 | Wire no. 8 | Terminal H3-4 |

**Note: There has to be 3 jumpers present on the H11 module and dip switch number 3 has to be off.**  

  

**1\. Jumper: H11-1 to H11-3**  

**2\. Jumper: H11-2 to H11-11**  

**3\. Jumper: H11-10 to H11-12**

![image.png](https://epflzphzkusfkllchkfz.supabase.co/storage/v1/object/public/media/fc4da97f-e3bc-4b8d-b9e3-677a44b06d48/1780398617213-5pw99cb2499.png?v=1)