> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://wiser.airwallet.net/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Whirlpool dryer CEM2745FQ

| This type of machine is installed with a single pulse-operated terminal, which is occupied by the coin acceptor. If you want the coin acceptor to stay installed, you can use a 2-POL relay (provided by Airwallet) to make a circuit in parallel. The parallel circuit goes through the 2-POL relay and the relay is controlled by the Airwallet Pro. This is illustrated by the schematic (below).

### Installation videos

Coming soon

---

### Recommended dashboard setup 

Variable ➜ Full Duration
Time increment: 10 min., Busy signal: None

---

### Recommended machine setup 

Ensure the machine is setup for coin payment.

---

### Wiring diagram

| **No.** | **AW PRO310 or higher** | **Wiring diagram** |
| ---- |
| 1 | Wire no. 1 | Line terminal |
| 2 | Wire no. 2 | Neutral terminal |
| 3 | Wire no. 3 | Line terminal |
| 4 | Wire no. 4 | Relay A1 |
| 5 | Wire no. 5 | Not in use |
| 6 | Wire no. 6 | Not in use |
| 7 | Wire no. 7 | Not in use |

| **Jumper 1 :** Neutral terminal ➜ Relay A2

![](https://storage.crisp.chat/users/helpdesk/website/-/8/f/b/d/8fbd610f32d91000/image_zoyg3p.png)

![](https://storage.crisp.chat/users/helpdesk/website/8fbd610f32d91000/whirlpool-dryer-diagram24x_1xznltv.png)