Articles on: Installations
This article is also available in:

Miele - Washers with XCI-Box (dosing and payment)

Not sure which Airwallet unit you have? See Which Airwallet unit do you have?.


Is this your XCI box?


This guide is for the full XCI-Box, which handles dosing and payment and has terminals 1.1 to 1.4. If your box has no terminals 1.1 to 1.4, or its label reads APCL103 XCI adapter payment system, use Miele - Washers with XCI payment adapter (APCL 103) instead.


Compatible machines


PWM 307, PWM 500-08, PWM 500-09, PWM 506 Mop Star 60, PWM 507, PWM 508 Mop Star 80, PWM 900-09, PWM 906, PWM 907, PWM 908 (Performance and Performance Plus).


Before you start


  • The payment system is set when the machine is first commissioned. If the machine is already in use, book Miele Service to change the setting.
  • Switch off and isolate the machine before you open the XCI-Box or connect any wire.
  • The connection must be made by a qualified electrician.


Installation videos




Fixed ➜ User start time ➜ 15 min.


Busy signal: End (High can also be used, if selected in the machine setup)



Payment system ➜ Programme control


Feedback signal ➜ Programme end


Delete paid signal ➜ Yes


Wiring diagram


No.

PRO310–330

PRO340

Wiring diagram

1

Wire no. 1

Wire no. 1

Terminal 2.6

2

Wire no. 2

Wire no. 2

Terminal 1.4

3

Wire no. 3

Wire no. 3

Terminal 3.1

4

Wire no. 4

Wire no. 4

Terminal 2.3

5

Wire no. 5

Wire no. 5

Terminal 2.2

6

Wire no. 6

Wire no. 6

Not in use

7

Wire no. 7

Wire no. 7

Not in use

8

No wire 8

Wire no. 8

Not in use


Jumper 1: Terminal 2.4 ➜ terminal 3.2



Updated on: 12/11/2026

Was this article helpful?

Share your feedback

Cancel

Thank you!