Miele - Dryers with XCI-Box (dosing and payment)
Not sure which Airwallet unit you have? See Which Airwallet unit do you have?.
Is this your XCI box?
This guide is for the full XCI-Box, which handles dosing and payment and has terminals 1.1 to 1.4. If your box has no terminals 1.1 to 1.4, or its label reads APCL103 XCI adapter payment system, use Miele - Dryers with XCI payment adapter (APCL 103) instead.
Compatible machines
PDR 307, PDR 500-08, PDR 507, PDR 900-08, PDR 908 (Performance and Performance Plus).
Before you start
- The payment system is set when the machine is first commissioned. If the machine is already in use, book Miele Service to change the setting.
- Switch off and isolate the machine before you open the XCI-Box or connect any wire.
- The connection must be made by a qualified electrician.
Installation videos
Recommended dashboard setup
Fixed ➜ User start time ➜ 15 min.
Busy signal: End (High can also be used, if selected in the machine setup)
Recommended machine setup
Payment system ➜ Programme control
Feedback signal ➜ Programme end
Delete paid signal ➜ Yes
Wiring diagram
No. | PRO310–330 | PRO340 | Wiring diagram |
|---|---|---|---|
1 | Wire no. 1 | Wire no. 1 | Terminal 2.6 |
2 | Wire no. 2 | Wire no. 2 | Terminal 1.4 |
3 | Wire no. 3 | Wire no. 3 | Terminal 3.1 |
4 | Wire no. 4 | Wire no. 4 | Terminal 2.3 |
5 | Wire no. 5 | Wire no. 5 | Terminal 2.2 |
6 | Wire no. 6 | Wire no. 6 | Not in use |
7 | Wire no. 7 | Wire no. 7 | Not in use |
8 | No wire 8 | Wire no. 8 | Not in use |
Jumper 1: Terminal 2.4 ➜ terminal 3.2

Updated on: 12/11/2026
Thank you!