Electrolux - myPRO Zip Washer
Recommended dashboard setup
Fixed ➜Pulse operated
Pulse length: 500 ms., Pulse repetition: 1, Busy signal: High
Recommended machine setup
Put the machine into Programming Mode by shorting pins 1 & 3 until the display shows dec (decimal). Decimal Point is optional.
Set C1 (Coin Value 1) to the figure of 1
Set C2 (Coin Value 2) to the figure of 0
Set each Program to the Value of 1
End Programming
Disable child lock: To deactivate this option, press and hold the Stains/Prewash (10) and the Extra Rinse (7) buttons for 5 seconds until the padlock no longer displays on the LED display.
Wiring diagram
| No. | AW PRO310 or higher | Wiring diagram |
|---|---|---|
| 1 | Wire no. 1 | Line and Terminal 8 |
| 2 | Wire no. 2 | Neutral |
| 3 | Wire no. 3 | Terminal 5 |
| 4 | Wire no. 4 | Terminal 1 |
| 5 | Wire no. 5 | Terminal 7 |
| 6 | Wire no. 6 | Not in use |
| 7 | Wire no. 7 | Not in use |
Updated on: 14/12/2023
Thank you!