Electrolux - myPRO XL
**### Recommended dashboard setup
Fixed ➜Pulse operated
Pulse length: 100 ms., Pulse repetition: 1, Busy signal: None, Occupied for: 15 min.
Recommended machine setup
- Press the reset button (A) for 2 seconds, then release the finger to enter service mode. When this succeeds the display will show 8888.
- Now Set C1 (Coin Value 1) to 1
- Set C2 (Coin Value 2) to 0
- Set each Program to the Value of 1
- End Programming
Wiring diagram
No. | AW PRO310 or higher | Wiring diagram |
|---|---|---|
1 | Wire no. 1 | Line |
2 | Wire no. 2 | Neutral |
3 | Wire no. 3 | Input Coin 1 |
4 | Wire no. 4 | Not in use |
5 | Wire no. 5 | Not in use |
6 | Wire no. 6 | Not in use |
7 | Wire no. 7 | GND Coin 1 |
Updated on: 18/12/2023
Thank you!