LG - Giant C Washer (No feedback)
Installation videos
Recommended dashboard setup
Pulse Type: Fixed ➜ Pulse operated
Pulse length: 63-80ms
Pulse repetition: 1
Busy signal: None
Recommended machine setup
Setup the machine with coin drop 1 according to the installation manual.
Wiring diagram
No. | AW PRO310 or higher | Wiring diagram |
---|---|---|
1 | Wire no. 1 | Line - 100-240VAC |
2 | Wire no. 2 | Neutral - 100-240VAC |
3 | Wire no. 3 | Coin drop connector - PIN 6 (RED or ORANGE wire) |
4 | Wire no. 4 | Coin drop connector - PIN 4 (BROWN wire) |
5 | Wire no. 5 | Not in use |
6 | Wire no. 6 | Not in use |
7 | Wire no. 7 | Not in use |
If NO COIN DROP is installed, It may be required to loop together the LIGHT BLUE and the GREY wires at pins 1 and 3, in order for the machine to operate properly. When disconnected, the machine will enter "Programming" mode.
Updated on: 23/07/2025
Thank you!