Speed Queen Quantum Card Ready washer SWNNY2SP116

Speed Queen Quantum Card Ready washer. SWNNY2SP116# - no feedback

NOTE: This machine type may not have the harness for coins at plug H11. The tech will need to acquire the Alliance coin harness for the specified machine. Alternately, The Airwallet Pro400 and Airwallet Alliance ACA/Quantum harness can be used instead of the factory Alliance harness.

Recommended dashboard setup

Fixed ➜ Pulse operated

Pulse length: 80-100 ms., pulse repetition: 1, busy signal: none, occupied 25 minutes

Recommended machine setup

Note: The machine has to be set to Pulse in machine settings

From Manual Mode (machine settings) you have to change the machine to Pulse:

(optional) PLSNod should be set to 128

PLSdEn should be set to .25 per pulse or if it is fixed amount it can be set to e.g. 3.00$

Wiring diagram

Note: There has to be added a jumper between H11-10 and H11-12 on the machine

The H11 connector is used for the start signal.

No.	AW PRO310 or higher	Wiring diagram
1	Wire no. 1	Line
2	Wire no. 2	Neutral
3	Wire no. 3	H11 - 7
4	Wire no. 4	Not in use
5	Wire no. 5	Not in use
6	Wire no. 6	Not in use
7	Wire no. 7	H11 - 8

Updated on: 28/10/2025

Was this article helpful?

Thank you!